HF·A SERIES FIBER LASER CUTTING SHEET METAL MACHINE
The advantage of HF·A SERIES high speed laser cutting machine
● High cutting efficiency, high cost performance and low running cost
● High cutting performance for copper/brass, aluminum, stainless steel and carbon steel
Let’s watch a video of our company:
Features of 1.5 kw fiber laser cutting machine:
1. Deal with the disposable material requirements of the large products and Marine industries, and high precision cutting can be guaranteed. Hymson targeted to develop the super wide laser cutting machine and overcome the limitations of the market existing laser cutting machine processing wide sea star, constantly breaking the technical difficulties.
● Large processing format, with 3000* 3000mm (optional) processing space, with laser cutting high precision, high efficiency, clean and environmental protection features, has replaced the traditional flame and plasma cutting ability.
● Hymson patent – intelligent compensation beam; The unique beam structure design reduces the processing difficulty with its structural advantages, reduces the force of thermal expansion and cold contraction on the moving parts, and improves the service life of the guide rail and reducer;
● Unique exhaust structure design, reduce wind resistance and improve the exhaust effect, change the problem of smoke and dust pollution of large format cutting machine;
● Tenon and mortise plate welding machine to enhance the rigidity of the large format cutting machine, ensure the manufacturing precision of the machine, to meet the industrial needs of long-term stable operation.
2. Cutting Technology of industrial metal laser cutting machine
▲ Leapfrog Cutting、Automatic Obstacle Avoidance、Lightning Cutting
▲ Rapid Perforation、Breakpoint Resume、Arbitrary Point Cut-in
▲ Gradual Speed Regulation in Tool Start、Aluminum Alloy Burr-free Cutting (Optional)
▲ Fly-cutting High Speed Cutting
3. Machine Bed of stainless steel cutting machine
- Super rigid machine base proven by coin test.
● Utilize state of the art welding technology to form the machine tool base.
● Heat treatment to strengthen the intensity and stiffness of base.
Standard industrial machine tool processing procedure
4. Master 6000 Control System
The equipment applies Master 6000 laser cutting control system, with simple and elegant interfaces, strong and practical functions and a large-screen display. It is a professional laser cutting system developed based on the Windows operating system and integrating many laser cutting modules with dedicated functions. Equipped with a wireless keyboard and a wireless mouse, the equipment is easy to operate.
5. Simple and Practical Cutting Software
We provide Master 6000 cutting software with complete functions. With rich functions, the software highly simplifies and optimizes the cutting process to significantly improve the operator’s work efficiency and production efficiency.
6. Automatic Switching between Marking and Cutting Modes
The marking and cutting modes are separately set by the operator before the commencement of cutting. The operator may reconfigure the machine and input new settings without stopping the material handling process. The switching between modes is automatic, which improves the productivity of compound cutting.
The operator conducts setup before starting the processing without stopping the material handling.
7. Graphic Operation Function
Master 6000 provides common drawing functions, which can be easily used from the drawing toolbar on the left side. The use of these drawing functions is mostly similar with AutoCAD and is very intuitionistic. The software has a number of humanized graphic operation functions and has a common graphics library, such as five-pointed star call, etc., so it is easy and quick to get started.
8.Supporting Multiple Files
Master 6000 software supports such graphic and data formats as .G, DXF, DWG, PLT, ENG, etc. and accepts international standard G codes generated by Master Cam, Type3, etc. The opening/import of external files, such as DXF, etc. are optimized automatically, which saves times and is efficient.
8. Why choose Hymson laser
- Intelligent dust exhaust system: Work on the cutting area only, strengthen the ventilation effect.
● Intelligent gas control system: save gas up to 50%
● Auto-focusing: accurate, fast and smart
● Full-automatic lubrication system: Auto lubricate the gear and rack, maintenance free.
● Installation/training & support by global factory trained engineers.
The remote wireless remote controller allows the operator to perform the most operations from any convenient location: starting and stopping the program, lighting out, following, reversing the contour, increasing/decreasing the focal length, changing the feed rate, and outputting machine parts.
Screws, air-cooled, with sound-insulated housing, receiver, desiccant, and ancillary equipment for air cutting up to 16 atmospheres.
Vertical low-temperature gasifier
Used as a replacement for standard cylinders when used for cutting gas consumption increases. (eg: cutting stainless steel)
Operator safety glasses
Direct, reflected and scattered laser beams may damage the operator’s vision and may even lead to blindness. In order to protect the eyes from laser radiation, special protective glasses should be used.
Used to remove the combustion products produced during the cutting process.
Filter – Ventilation
Filters – Ventilators are designed to remove suspended, fine and moderately dispersed dust and smoke from air during welding, metal thermal cutting, etc.
Protective glasses, nozzle.
User’s Machine Installation Site Condition Preparation
|1||Power Supply Capacity: ≥60KVA|
|2||Power Supply Requirements: (1) Three-phase voltage stability＜±5%; (2) Unbalancedness of three-phase power supply < 2.5% (Note: Abrupt changes in supply voltage and sudden power failure are not allowed, otherwise, the laser may be damaged easily. Good grounding is required (ground resistance < 3 Ohm).|
|3||Compressed Air Supply Requirements:
(1) Air supply capacity: ≥ 0.8m3/min (2) Air supply pressure: ≥ 7bar
(3) Dewpoint ≤ 5℃ (4) Oil content ≤ 0.01ppm Solid particle ≤ 0.01μm
|4||Auxiliary gas for cutting: Oxygen (O2)/ Nitrogen (N2): Purity ≥ 99.99%|
|5||Sheet (Tube) Cutting: Black skin, smooth, level, rustless, evenly rolled, reaching the ISO standard.|
|6||Installation Site Requirements: 1. The foundation for equipment installation does not settle and should be constructed according to the foundation drawing provided by Party B; 2. Temperature Requirement: [5-30]℃; 3. Humidity Requirement: < 70%; 4. After the equipment is installed and commissioned, separate the laser and install an air conditioner.|
|7||The equipment operator should have been graduated from a secondary specialized school or above and have the experience in operation of computers and general numerically-controlled lathes. The equipment should be equipped with a programming computer.|
Installation and Commissioning
- All the equipment provided under the contract should be installed and commissioned by Hymson. After the contract is signed, we will determine the specific installation location of the equipment in the shortest time and provide the equipment foundation drawing within 5 working days after the contract goes into effect. Prior to the installation and commissioning, you should prepare the equipment foundation strictly according to the requirements specified in the equipment foundation drawing provided by Hymson. After the installation site is ensured, the engineers will install and commission the equipment with the tools they carry and, within 10 days, complete the installation, commissioning, technical index tests, training, acceptance and delivery for use;
- The expenses related to the installation and commissioning and the staff assigned should be borne by Hymson.
Transportation and Logistics
- The place of delivery should be your installation site.
- Standard packaging suitable for long-distance transportation by truck, being dampproof, rust-proof and shockproof; suitable for integral hoisting and indicating the centre of gravity for lifting and the hoisting position;
3. Mode of Transport: Motor transport. We should bear the freight and insurance.
4. Each packaging box should be accompanied by a detailed packing list and a quality certification as well as the instructions on the equipment and other documents and materials. The packing list should be outside the packaging box and the quality certification should be inside the packaging box.
- Welcome to send sample material to us for testing laser marking engraving for you.
2. We offer pictures, videos and other relevant documents for you to know more about the machine.
3. We are online and would respond fast to answer all your questions.
4. If you have chance visiting China, you are warmly welcome to visit our factory.
- Any parts have a quality problem during the warranty period, We will send you a new replacement for free. And Customer affords the replacement shipping cost.
2. The training video, detailed manual, and catalog sent with the machine. The customer could study the operation of the machine by watching the clear training video.
3. If there is a technical problem or new inquiry, Hymson has a fast response to service support by online or email even if need by the phone call.
4. Professional technical support and after sales following up. A free software update.
1) What are the primary products of your company?
Our primary products include sheet metal laser cutting machine, 1000 Watt Fiber Laser Cutting Machine，tube laser cutting machine, precision laser cutting machine, laser welding machine.
2) Where is your fiber laser equipment applied to?
Our Fiber Laser cutting Machine is suitable for all kind of stainless steel, carbon steel, aluminium, copper, galvanized steel, electrolytic steel and silicon steel etc.
3) What are the advantages of your laser equipment?
By using Hymson laser, you can monitor end-to-end process and take complete control of all the machining process. The whole machining process will be done smoothly, which will greatly improve production efficiency. In addition, the precision and consistency of the products in mass production is guaranteed.
4) How to do control the quality when you produce laser equipment?
We introduce international advanced production technology, and strictly implement a series of measures of quality and cost control to ensure the quality of laser cutting machine. In addition, all raw materials are strictly inspected in accordance with international standards before they are put into production.
5) Which countries are your laser machinery sold to?
Our laser cutting machine sell all over the world, such as United States, Spain,Netherlands,Poland,France,Turkey, Switzerland,Iran,Egypt, India, South Africa, Malaysia, Canada,Mexico,Colombia,Brazil,Chile,Korea, Japan and many other countries.